Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 21.06.2025 03:48

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

2024–10–16 [ OO OLAOYE OYEBODE ]

I post the exact comment here.

Red Dead Redemption 2's PS5 Version Could Be Announced Next Week - Push Square

At least they know the answer if they wanted it.

This device then solves the entire problem.

This one hit behind the barn.

How many boxes 600 x 400 x 200 go into a 20ft container?

This is where this question deviates from being a 'generic' question, and becomes more specific.

The MOV will conduct when the voltage exceeds 50% of line voltage.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

Why don't I want to talk to my girlfriend when she loves me a lot? I feel bored.

One

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

‘Peacekeeper’ under investigation for role in Salt Lake City protest shooting - The Salt Lake Tribune

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

Barnstars:

So, the voltage could go up to 500 volts, and the fuse will not open up.

Musk's Daring Gambit Has Managed to Do Something Remarkable: Alienate Democrats AND Republicans - futurism.com

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

eight

But… the neutral is now “floating” because of the 1 ohm resistance.

What is truer than that which is true?

The bolt then partially travels down the line to your home.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

nine

IBM’s New Quantum Roadmap Brings the Bitcoin Threat Closer - Decrypt

At one ohm, the resistor has a maximum of 1 watt power.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

It also is a device that limits the change in current flow.

A Fifth Force of Nature May Have Been Discovered Inside Atoms - ScienceAlert

[image of Common-mode choke]

What does a fuse do?

First Sentence:

What were your fantasies when you reached puberty?

Upvotes:

(Dc diagram shown, AC is similar).

In schematic diagrams this is the symbol for a fuse:

MIT chemical engineers make potentially game-changing breakthrough with crude oil: 'Creates a new way to apply it' - The Cool Down

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

the problem then depends on "how fast does the fuse operate?".

This is where the MOV conducts again, and dissipated the energy.

Do you think President-Elect Donald Trump won the presidency fair and square, or do you think the GOP resorted to blatant unlawful practices to tilt the election?

He then describes the function of a fuse.

What is lightning?

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

It seems Mohan does not understand the difference between a comment and an Answer.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

A circuit breaker is similar, but is resettable.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

[old diagram got deleted by accident]

He then describes Rainy Season and Lightning.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

These devices are installed between the “hot” and “neutral” and protective ground.

These are simplified answers to the original question, and does not change anything I wrote above.

so, what happens?

He then asserts :

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

An AC voltage/ current source, and an ac inductive load.

The third is lightning and “how it gets conducted into a home.”

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

For this case there are devices called Metal oxide varistors (MOV).

what exactly is a ‘surge’ protector?

There are two important concepts here.

But it can get overloaded, and no longer works.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

Edit 2024–10.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

a photo is worth a thousand words.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

but I think this circuit , shows a few more pieces.

One is “what exactly is in a ‘surge protector’ ? ”

Here is a simplified AC power diagram.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

Because the load is inductive, the current lags the voltage.(by a bit).

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

There are three different concepts here that are getting confused.

2024–10–14 [Omar Gharbi Omar Gharbi ]

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

A fuse is a non-resetable over current circuit protector.

This is 'the assistant's answer'

2024–10–10[John johnson John Johnson ]

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

but this device (an Inductor) … impedes the rapid changes in the current.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

The other is “what does a “fuse” do?”

Now when you have a certain ac resistance, then a current flows in a loop.